LOW VOC Glue Cements for PVC Plastic Pipe
Product Code 2013 - Available in 118ml, 236ml & 473ml
Includes Ball Applicator in lid!
For domestic and industrial PVC-U, PVC-M,
PVC-O piping systems.
Suitable for SCH40, DIN with PVC pipe under
6” (150mm) diameter or medium size of PVC sheet.
Including drinking water, municipal
government drink & waste water, garden ponds, play ground and irrigation
application.
Dangerous:
HIGHLY FLAMMABLE liquid and Vapor. Keep away from heat, hot surfaces, sparks,
open flames and other ignition sources. No
Smoking during handling of product or afterwards.
Take precautionary measures against static
discharge.
Avoid breathing in the Vapor/Spray, only
use outdoors or in a well ventilated area.
May cause drowsiness or dizziness.
In case of difficulty in breathing, give oxygen and seek medical
treatment immediately. Can cause serious
damage to Eyes. Wear protective
gloves/protective clothing/eye protection/ face protection. IF IN EYES Rinse cautiously with water for
several minutes, remove contact lenses if present and easy to do so and seek
medical attention. In case of contact
with skin and eyes, flush with water for 15 minutes. If irritation persists,
seek medical attention, contact with skin and eyes may cause allergic
reactions.
Do Not Swallow, If accidentally swallowed,
do not induce vomiting, immediately drink two cups of water, and seek medical
attention immediately.
Read all instructions, product reports and
material safety data sheets carefully before use.
Keep out of reach of children.
Contains:
Tetrahydrofuran(109-99-9), Methyl Ethyl
Ketone(78-93-3), Acetone(67-64-
1), Cyclohexanone(108-94-1).
Keep out of reach of children. Do Not Swallow.
Store
between 40℉ (5℃) to 110℉ (44℃). Store in well ventilated
location. Do not decant into any other
vessel. Dispose of contents/container in
accordance with national regulations.
Shelf
Life:
This product has a shelf life of 3 years
from date of manufacture found on the bottom of this can when unopened and
stored in accordance to the manufacturers instructions. Shake well before use,
do not use if gelled.
Assembly
Method:
Please read the instructions below before
application;
1.
Shake well before use
2.
Cut pipe squarely, remove all
pipe shavings from inner and outer edges
3.
Lightly abrade contact surfaces
with emery cloth
4.
Clean joining surface using
Kockney Koi Solvent Cleaner to remove dirt, grease and moisture to ensure good
seal.
5.
Check dry fit of pieces.
6.
Working quickly with the
applicator inside the lid apply a full, even layer of cement to both surfaces.
7.
Immediately push pieces together
to the full depth and hold for 30 seconds, make sure pieces are flush together.
8.
Quickly remove any excess
cement.
9.
Reseal container immediately
after use.
10. Leave joint undisturbed for 10 minutes and allow a minimum of 6 hours at normal ambient temperature before putting into service
Safety Data Sheets - Product Code 2013 - Solvent Weld Cement Glue
Solvent Weld Cement Glue for PVC Pipes and Fittings
- Brand: Kockney Koi
- Product Code: 0
- Availability: In Stock